What should be paid attention to the painting robot for plastic parts ?
DANBACH ROBOT

---

What are the problems that need to be paid attention to in the process of painting robot plastic parts? This is a problem worthy of discussion. With the continuous improvement of people's quality of life, people's requirements for plastic products are getting higher and higher, not only the environmental protection of raw materials, but also the requirements for the quality of spraying. The higher it is. Therefore, many companies choose spray painting robots instead of manual labor. What problems should be paid attention to during the process of using robot spray?

What issues should be paid attention to in the process of painting robot plastic parts:

1. Appearance. The silk screen printing is to achieve the appearance effect that the mold can't achieve. Therefore, in the injection molding production, it is necessary to avoid the bad effect of the paint appearance, but some defects can be received, for example, the gas pattern, because it can be covered when painting. But also depends on the color of your paint and the process requirements of the spray painting robot.

2. The color difference of the material color. Unless you are spraying black, the material should not have too much chromatic aberration, because the painter will not repeat the oil adjustment for each batch of material. The same paint is sprayed on the material with chromatic aberration, and the paint effect will vary greatly.

3. water line,thimble printing, can be avoided to avoid, it can not be avoided, can be polished, it is best to spend some time grinding, this thing is quite ugly, especially after painting, highlight

4. the material surface is not clean, although it is said that there will be cleaning and dust removal treatment in the front part of the painting, but the oil on the surface of the product is best not to have. This involves your packaging, so packaging is also a big problem.

5. loss. The loss of painting is quite large. Generally speaking, the loss of about 10 PER is normal, so you should pay attention to the preparation of the material.

Previous：Three aspects that China needs to pay attention to handling AGV robots
next：The advantages of automatic loading equipment for industrial robots

you may also like / More Like

• Automatic lifting the AGV2018-12-10
• Laser-guided forklift the AGV2018-11-19
• Unidirectional roller AGV2018-07-14
• Towing AGV vehicle2018-07-14